• Analyzing image Intergrain_UltraGrip_200_grams_Decking_Perth
  • Intergrain_UltraGrip_500_grams_Decking_Perth
  • Intergrain_UltraGrip_Decking_Perth
1 2

Intergrain

INTERGRAIN - Ultragrip Additive

INTERGRAIN - Ultragrip Additive

$20.99 AUD
$26.60 AUD $20.99 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
Size

*

INTERGRAIN - Ultragrip Additive

UltraGrip is an additive that, when mixed in to compatible coatings, provides a textured surface which reduces the tendency for decking and timber walkways to become slippery when wet. Compatible coatings include: UltraDeck Timber Stain, UltraDeck Timber oil, DWD and UltraFloor Satin. For a pre-mixed formula that gives a P4 Slip Rating in 2 coats, use UltraDeck Slip Resistant.

INTERGRAIN ULTRAGRIP

Colour Accuracy: The colour, species, age and condition of the timber to be coated will impact the final colour and finish of all timber treatment products. The colours swatches on the website are from the relevant manufactueres and are to be viewed only as a guide of the colour and finish that can be achieved. Always test on a small area or off-cut for colour suitability before use.

KEY PRODUCT INFORMATION

  • Coverage: Add 500g of UltraGrip per 10L of product.
  • Recoat: N/A
  • Full cure: N/A
  • Clean up: Water
  • Sheen: N/A

 

WHERE TO USE
Areas - Decking, Stairs, Exterior timber, Interior timber floors, Ramps
Substrates - All exterior timber
Locations - Exterior

200G INSTRUCTIONS

Methods: Mix UltraGrip with a Flat Blade Stirrer

1. Add 200g of UltraGrip per 4L of product.
2. UltraGrip must be added to each coat of UltraDeck Timber Oil, UltraDeck Timber Stain or Intergrain Heavy Duty.
3. Stir contents of the UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty can thoroughly with a flat blade stirrer.
4. To avoid spillage, remove 500ml of the timber coating from the can before adding UltraGrip.
5. While stirring, add the full container of UltraGrip slowly to avoid generating dust. Stir in UltraGrip thoroughly before, and during use, with a flat blade stirrer.
6. Add removed timber coating back to the can as space becomes available. Stir thoroughly.
7. IMPORTANT: Stir regularly with a flat blade stirrer during application to prevent settling.
8. Apply timber coating as specified on the UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty label instructions.

500G INSTRUCTIONS

Methods: Mix UltraGrip with a Flat Blade Stirrer

1. Add 500g of UltraGrip per 10L of product.
2. UltraGrip must be added to each coat of UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty.
3. Stir contents of the UltraDeck Timber Oil, UltraDeck Timber Stain, or Heavy Duty can thoroughly with a flat blade stirrer.
4. To avoid spillage, remove 500ml of the timber coating from the can before adding UltraGrip.
5. While stirring, add the full container of UltraGrip slowly to avoid generating dust. Stir in UltraGrip thoroughly before, and during use, with a flat blade stirrer.
6. Add removed timber coating back to the can as space becomes available.
7. Stir thoroughly.
IMPORTANT: Stir regularly with a flat blade stirrer during application to prevent settling.
8. Apply timber coating as specified on the UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty label instructions.

MAINTENANCE

Refer to UltraDeck Timber Oil, UltraDeck Timber Stain or Heavy Duty can for maintenance instructions.

IMPORTANT: UltraGrip must be added at the specified rate to each coat of UltraDeck Timber Stain, UltraDeck Timber oil or Heavy Duty.

Complies with Australian Building Standards.- Special order product – 3–5 business days lead time from order placement.*
View full details