Intergrain

INTERGRAIN - Woodblend Putty

Name: INTERGRAIN - Woodblend Putty
Brand: Intergrain
SKU: 92794826-180G
Price: 14.69 AUD
Availability: InStock

INTERGRAIN - Woodblend Putty

$14.69 AUD

~~$16.20 AUD~~ $14.69 AUD

Sale Sold out

Tax included. Shipping calculated at checkout.

Colour Ash/Meranti Cypress/Cedar Jarrah/Merbau Radiata/Baltic Teak/Blackwood Walnut/Dark Oak

Product variants

Quantity

INTERGRAIN - Woodblend Putty

A water based timber and grain filler, suitable for both interior and exterior use. Woodblend sands to an extremely fine, smooth finish. Woodblend can be coated with water or oil based timber finishes and paints. Available in six intermixable colours.

INTERGRAIN WOODBLEND PUTTY

Colour Accuracy: The colour, species, age and condition of the timber to be coated will impact the final colour and finish of all timber treatment products. The colours swatches on the website are from the relevant manufactueres and are to be viewed only as a guide of the colour and finish that can be achieved. Always test on a small area or off-cut for colour suitability before use.

KEY PRODUCT INFORMATION

Coverage: 5m2/L
Recoat: 2hrs
Full cure: N/A
Clean up: Water
Sheen: N/A

CAN SIZES: 180G

WHERE TO USE
Areas - All interior timber, Exterior timber
Substrates - All interior timber
Locations - Interior, Exterior

SURFACE PREP

Surface must be in sound condition, clean, dry and free from dust, grease, wax and oil. Indentations and holes must be clear of all loose material.

APPLICATION

Methods: Filling blade or knife

1. Apply WoodBlend with a flexible filling blade or knife. Fill deep holes in approx. 10mm stages, allowing two hours drying time between each stage.
2. To ease application, dampen blade with water.
3. Wipe off excess with a slightly damp sponge. When dry, sand to a smooth finish.
4. When using clear finishes, apply WoodBlend after the first coat of clear to minimise smudging.
5. For use as a grain filler, thin WoodBlend with 5-10% water to achieve required consistency. Apply with a flexible filling blade or knife and allow to dry. When dry, sand back to bare timber, leaving filler only in the grain.

IMPORTANT: Keep container tightly closed when not in use.